Configure Endpoint Tracking visibility mode on the
switch.
Before you begin
- In ExtremeCloud IQ Site Engine, configure your third-party virtualization platform,
and the RADIUS server used for Endpoint Tracking authentication. For
information about configuring ExtremeCloud IQ Site Engine, see the ExtremeCloud IQ Site Engine
documentation at https://www.extremenetworks.com/support/documentation/.
-
On the switch, add and configure the RADIUS server as configured in ExtremeCloud IQ Site Engine.
-
Create and enable Endpoint Tracking on interfaces.
-
Enable Endpoint Tracking globally on the
switch.
About this task
Enable visibility mode to allow MAC learning on static S-UNIs for Endpoint Tracking.
Procedure
-
Enter Global Configuration mode:
enable
configure
terminal
-
Enable Endpoint Tracking visibility mode on the
switch:
endpoint-tracking
visibility-mode